Check out the second arrow around 0:49.
This is called a back tension release.... you keep pulling into the "wall" generated by the cams at full draw until you overcome spring pressure to allow the release to snap open, thus allowing a "surprise" shot.
The downside to these POS things is that the bow draws 50lb+ but you're only holding about 20lb at full draw, so you need a safety that is held in until you get to full draw, then you release the safety and begin to load into the wall for the shot.
Theoretically you hold the safety in, anyway.
No comments:
Post a Comment
Please be aware that all comments are moderated so if you're a scumbag spammer then I suggest not wasting your time. Your spam will not be seen by anyone.
Note: Only a member of this blog may post a comment.